Saturday, November 26, 2022

10 things to know about car polish

- Advertisement -spot_imgspot_img
- Advertisement -spot_imgspot_img

To keep your vehicle’s paint bright and shiny, it’s best to use a liquid car polish. In fact, this product is widely used by experts in auto mechanics as part of the comprehensive maintenance of a vehicle.

It must be considered that external agents such as temperature, sun, insects, sand and dirt in general, undermine the quality of the car’s paint over time. Another factor that causes damage to the bodywork are the scratches or stains that can be caused by accident, and that undoubtedly deteriorate the car’s paint layer considerably.

To eliminate incidences of all these factors, you can use the polishing liquid for cars. To remove scratches in some cases requires the use of hand sanders or electric sanders, and in others it is only enough to apply the rinse aid.

In this note we indicate 10 things you should know about this useful product.

1. Abrasive product

The vehicle polish It’s semi-abrasive, so each time you apply it, it removes a thin layer from the car’s exterior.

It is a product that you must apply carefully and according to its instructions for use. This liquid should not be deliberately applied on the car paint, as it could cause damage to it.

2. function

Due to its abrasive nature, the polishing liquid for cars removes all particles attached to the surface of the vehicle. Both irregularities and uneven areas of the car paint will be smoothed out. The polish also works on paint scratches.

The main function of rinse aid is to clean the painting of imperfections, by means of its soft or controlled abrasives. This is what gives your car a shiny, polished look.

car polish liquid

3. Application sequence

In case you want to apply rinse aid and wax to your car (as usual), you must follow a proper order of application. After thoroughly washing your car, you should proceed with the polish coat, and after the polish dries completely, you can apply the wax or sealant.

This is the right way to properly maintain your vehicle’s paint.

First of all, the controlled abrasives of the polish are responsible for removing irregularities from the exterior of the car, leaving the paint with a perfect finish. Next, the wax is applied to provide the polished surface with a protective layer that extends or maintains the effects of the polishing liquid over time.

4. Application frequency

Because the rinse aid removes a small layer of paint each time you apply it, you don’t have to polish your car as often as you apply sealant or wax. The polish is applied when the paint is particularly dull, which usually occurs after several years of accumulated dirt and damage caused by environmental factors.

Experts recommend applying the polishing liquid between 1 and 2 times a year. You don’t have to apply it every time you want the paint to look shiny.

5. Composition

The polishing liquid for the car includes in its composition slightly abrasive polymers. In some cases, it might also include fillers designed to hide imperfections in the paint.

Buffing with the liquid will give the paint a shine, but this process will wear it down over time and weather conditions. There are various types of car polishes on the market, so we recommend you read all the components of the product and what its function is. Don’t blindly select a rinse aid.

car polish liquid

car polish liquid

6. Application

According to its composition a rinse aid It must be applied in a certain way, to obtain the expected results.

You must read the instructions for use carefully, since some are designed to polish manually, others to carry out the work manually and in a washing tunnel. Likewise, there are polishes made to be applied exclusively with rotary polishers, at a certain speed and with a certain type of mop or foam pad.

In the instructions for use you can also find relevant details about the precise way to apply the product on the vehicle’s paint. The standard way to apply a liquid polish, is by placing small portions of the product on the surface to be polished using a soft cloth or chamois. Then proceed to rub in a circular manner and exerting light pressure, until the liquid dries. Finally, the area is reviewed with a clean cloth. This same procedure is carried out with greater speed, using a disc polisher.

You must consider that some products have a high concentration, so they allow dilutions in a certain percentage, before their application.

When polishing a car you must protect the parts of the bodywork that will not be polished, we refer to the headlights, rear-view mirrors, logos, symbols, among others. To protect these parts you can use adhesive tape. In this way you will prevent the polishing liquid damage surfaces for which it is not designed. It is also very important that you delimit the areas of different colors, for which you can also use a tape that is easy to remove and does not leave stains.

It is recommended not to polish on hot surfaces or in areas exposed to the sun.

7. Complementary products

To obtain a shiny paint with the application of the rinse aid, you must have certain complementary products that, on the one hand, will prepare the surface of the car to be polished, and on the other, will reinforce the polishing work.

Prior to the application of rinse aidYou must wash your vehicle very well. For this task, it is best to use products specifically designed for car washing. Using soap and other household cleaning products could damage the paint finish. Make sure that the product you use to clean the vehicle guarantees the total removal of grease, dust and any other dirt. The car must be completely clean before applying the rinse aid.

After the application of polishing liquid, the use of wax or sealant is recommended to protect the surface of your car. As we mentioned before, the sealer protects the buffing or polishing work, so it is highly recommended that you wax the car after polishing.

car wax

car wax

8. Expected result

The proper use of polishing liquid for cars, brings several benefits to the paint of your vehicle:

  • Great aesthetic finish with a high gloss.
  • Wet paint finish.
  • Removes resistant grease without damaging rubber, chrome, or other bodywork components.
  • Roughens the paint leaving it fine and shiny.
  • Eliminates orange peel skin, slight sagging and small flaws.
  • Restores the shine of the aged surface, removes stains and small scratches.

9. Combined product

There are products on the market that provide dual function, so you should also consider these options.

Some liquids combine the cleaning function with polishing, are suitable for manual use and in washing tunnels, and of course save work time by allowing two tasks to be carried out in one.

You may find products made to polish dark colors and others suitable for treating light colors. This is something you should also validate.

10. Safety precautions

When using the polishing liquid for cars You must bear in mind certain security aspects:

  • Use the product only for its intended purpose. It is not recommended that you apply it on surfaces other than those of a motor vehicle.
  • Keep the product out of the reach of children.
  • Avoid ingestion and inhalation of vapors.
  • Avoid extended contact with skin, eyes, and mucous membranes.
  • Work in an area with adequate ventilation.
  • Use personal protection elements: gloves, glasses and respiratory protection.
  • Avoid contact of the product with flames, sparks or heat sources.
  • In case of accidental fire, do not use water to extinguish it. You must use type BC extinguishers: CO2, chemical powder or foam.
  • In case liquid spills, use sand or another suitable absorbent to contain it.
  • Never apply polish in direct sunlight.

These are the main aspects to take into account regarding the polishing liquid for cars. Keeping this information in mind, you will be able to make proper use of this useful product.

Video: how to apply the liquid polish

User Review


4.11
(9 votes)

- Advertisement -spot_imgspot_img
Latest news
- Advertisement -spot_img
Related news
- Advertisement -spot_img

LEAVE A REPLY

Please enter your comment!
Please enter your name here