The riveter manual is a tool that is often used a lot because it is very practical and economical. It is similar to a clamp, but varies in size, being larger (there are various types of riveters, from the hobbyist to those used in factories weighing more than 100 kg). The riveters are used to join two pieces, of the same or different material and that according to the type of riveter Y rivet that we use, its thickness may vary. It is important to use it with total care and responsibility. When we use the riveters manual, at the moment in which the tool is closed, you must be careful with your fingers, because carelessness can cause injuries. In the case that we want to separate the joined parts with a rivet, it will be possible, using the appropriate tool (when it comes to pop rivets, with a drill and a steel bit, we can undo the riveting).
Types of riveters
The riveters They usually vary according to their function and size.
- Hand riveter. It is the one used manually. Conforms to any size piece to be joined. It is generally known as pop riveter. Can’t miss one pop riveter in your atelier or workshop.
- Accordion riveter. This type is also used manually. It is only used with rivets of certain sizes such as: 2.4 mm, 3.2 mm, 4.0 mm, 4.8 mm, 5 and 6 mm. There’s also accordion riveters that allow larger sizes.
- C-clamp riveter. Varies in sizes depending on its use. The C-clamp riveters, is a pedal-operated tool that generally works in conjunction with an oleo-pneumatic pump. These tools are mostly provided with a series of buteroles of different sizes and shapes, according to the function that is going to be used. The buteroles allow different operations to be carried out, such as extracting rivets, forming flanges and countersinking the rivet seats. It also allows drilling the aluminum sheet. The basis of operation is similar to that of a press. Its weight is around 3.5 kg, and the bomb can weigh around 8 kg.
- T-Column riveter. Its weight is more than 100 kg, and it also has a pedal but pneumatic drive. These machines use compressed air, with valves that allow us to regulate the pressure at work, the air consumption per hour, etc. The rivets that can be used with this type of riveter They are aluminum, copper, stainless steel and brass.
- Bench riveter. In its characteristics it is very similar to the previous one, but its weight is lower, since it does not exceed 60 kg, and it has an interchangeable puncture.
Uses of riveters
It is a tool for manual use mainly for carpentry and mechanical workshops.
Its main use is to make rivets on pieces that are going to be fixed. Rivets are the two-piece fit where the riveter It plays the role of the head of one of the two, so that when they are inserted through a cylindrical tube they are united, whether they are made of the same material or not.
The sizes of the rivets can vary depending on the pieces to fit, but it is very easy to change depending on the use that will be given to them. Normally, it comes with a hexagonal head, and what must be done is to choose the one that best fits the size according to the holes.
If you want to know more about types and uses of rivets click here
