The Stillson wrench, also called a wrench, is a manual tool that is used to tighten or loosen parts of different dimensions, such as screws, nuts, tubes, pipes, etc. This type of tool is considered within the category of adjustment wrenches together with the English or French wrench, the cross wrench, or the extendable wrench (for adjusting tubes). Its handling is very simple since the action of tightening or adjustment is required; It is for domestic use, that is, it is used in the home, as well as in large industries.
Stillson wrench parts
The Stillson wrench consists of the following parts:
- The body that is the part of the foot that presses the element or object.
- One gear attached to the other clamp foot.
- A ring threaded inside.
How does a Stillson wrench work?
This tool is very simple and easy to use. It is enough to turn the threaded ring and the gear, with one of the tightening supports, closes or opens giving the desired diameter for adjustment. Most of these keys have two springs, which are like suspensions, which serve to tighten the mouth when adjusting.
In addition, it has the peculiarity of varying the opening of its jaws depending on the size of the nut or screw. The teeth have the shape of a vise, the same one that is capable of being able to firmly hold, without slipping, pieces such as smooth pipes, nuts, worn or rolled screws.
If you want to know more about its manufacture or about other keys such as the so-called spout keys, we recommend you continue with this technical note.
Where is it used?
The Stillson wrench it is homely because generally one is not missing at home. This is commonly used to tighten or loosen screws and nuts of different furniture that we have in the home. It is also a primary tool for plumbers who use it to tighten or loosen pipes.
The Stillson wrench or tap is also used in factories or industries as it has different sizes to adapt to all types and sizes of nuts, tubes or screws.
What sizes are Stillson wrenches?
The sizes or measurements of the stillson keys they are very varied. Those used in the home are generally 8, 10, 12 and 14 inches. The largest ones such as 18, 24, 36, 48 and 60 inches that are for industrial use, or to carry out heavier and larger jobs.
In case of using the Stillson wrench In chrome tubes, such as pipes or showers, it is advisable to put a cloth between the faucet and the tube. In this way, it will not be marked or damaged by the teeth located in the opening of the tool jaws. Spain or similar paper can also be used.
After use, it is important to clean the tool and some lubricating and protective oil can be put on the gear.
A special recommendation: you should not miss a Stillson wrench at home.